Polyester Cloth vs. Fleece Wire Harness Tape: What to Check Before Buying
A wiring harness can have tight clips, branches and areas where the bundle contacts a panel. Compare polyester cloth and fleece tape on the actual routing so you can see how the backing affects wrap thickness, fit and handling.
Mark the sections that drive the choice
Identify areas where the bundle may rub against a bracket, contact an interior panel or pass through a narrow clip. If reducing contact noise matters, include fleece in the sample trial and check it against the actual mating surface. If abrasion is the main concern, compare the test data for the exact grades and use the required abrasion method for the assembly.
Wrap both samples on the same bundle
Use the same tape width, overlap and wrapping method for the comparison. Include a straight run, a bend and a branch. Check for coverage gaps near the branch and inspect the end of the wrap for lifting. Install the wrapped bundle in the intended clips. Verify that the clips close normally and that the additional wrap thickness leaves the required clearance.
Specify the installation area on your inquiry
Compare HAOXUAN’s polyester cloth wire harness tape and polyester fleece wire harness tape. Include the bundle diameter, roll dimensions, installation zone, operating temperature and any abrasion, noise or fluid exposure requirements. See the automotive wire harnessing guide for more information about matching tape to the routing.
