Refrigeration & appliances
Refrigerator Tubing and Foil Tape: A Sample Checklist
Use the liner material, tube layout and assembly conditions to prepare a useful foil-tape sample trial.

Record the liner and tube layout
Send the liner material and finish, the tubing diameter and a drawing or photo of the straight runs and bends. Mark the areas where the tape needs to contact both the liner and the copper tube. Check the tape path against the approved appliance drawing.
Define the tape and assembly conditions
Record the tape width, roll length, liner and winding direction. Note the surface temperature at application, the conditions in service and whether the line applies the tape by hand or machine. Share any document or test requirement for the exact grade.
Agree how to inspect the trial
Use production-representative liner and tubing samples. Review contact on both sides of the tube, creases, lift at the edges and roll handling. Agree the test conditions and acceptance criteria with the appliance team before placing a production order.
