Skip to content

Water-Activated Kraft Tape vs. Hot Melt Packing Tape for Carton Sealing

When choosing tape for corrugated cartons, start with the board, the packing station and the shipping route. Water-activated kraft tape and pressure-sensitive hot melt packing tape use different application methods. A trial with your actual cartons will show which one fits your operation.


Match the tape to the packing station



Reinforced water-activated kraft tape requires a dispenser or another controlled way to wet the adhesive. Check that the dispenser wets the full width and cuts consistent lengths. Hot melt packing tape is pressure-sensitive. Check roll width, core size and unwind on the hand dispenser or carton sealer you plan to use. Time the whole sealing cycle, including roll changes and any rework.


Trial the cartons you actually ship


Use the same carton size, board grade and fill weight for both trials. Include cartons from regular production, especially if you buy board from multiple suppliers. Check the center seam and the ends of the tape after sealing, then reinspect after representative storage and handling. Record lifting ends, gaps at the flap edges and any cases that reopen. If cartons spend time in a cold warehouse, include that stage in the trial.


What to send with a quote request


Share your carton dimensions, loaded weight, board type, packing speed, dispenser model and expected storage conditions. Add the roll width and length you need. If you have a sample carton or a photo of a failed seal, include it when you request tape samples.

Tell us about your project.

* Required fields

How can we help?